Create Authentic and Realistic Drum Sounds with Arturia Spark VDM v1.7.2-R2R [deepstatus] - Free Setup Guide
Arturia Spark VDM V1.7.2-R2R [deepstatus] Setup Free
Introduction
If you are a music producer, composer, or enthusiast, you probably know how important it is to have a good drum machine software. A drum machine can help you create realistic and expressive drum sounds, rhythms, and grooves for your music projects. But finding a good drum machine software can be hard, especially if you are on a tight budget.
Arturia Spark VDM V1.7.2-R2R [deepstatus] Setup Free
That's why I'm here to tell you about Arturia Spark VDM, one of the best drum machine software available on the market. And the best part is, you can download and install it for free from the link below. Yes, you heard me right. You can get this amazing software for free, thanks to the generous team at R2R who cracked it and shared it with us.
In this article, I will tell you what Arturia Spark VDM is, what are its features, why you should download it, how to download and install it, and how to use it to create amazing music. So let's get started.
What is Arturia Spark VDM?
Arturia Spark VDM is a virtual drum machine software that emulates the sounds and features of some of the most iconic vintage drum machines ever made. VDM stands for Vintage Drum Machines, and that's exactly what you get with this software. You get access to 30 legendary drum machines from the 60s, 70s, and 80s, such as Roland TR-808, TR-909, LinnDrum, Oberheim DMX, Simmons SDS-V, and many more.
But Arturia Spark VDM is not just a simple emulation. It also adds modern features and enhancements that make it more powerful and versatile than the original hardware. You can tweak and customize every aspect of the drum sounds, from pitch and volume to filters and effects. You can also create complex patterns and sequences using the intuitive step sequencer or the real-time performance mode. You can even mix and master your tracks using the built-in mixer and effects.
What are the features of Arturia Spark VDM?
Arturia Spark VDM has many features that make it a great choice for any music producer or enthusiast. Here are some of them:
30 vintage drum machines with over 1300 presets
14 high-quality effects such as reverb, delay, distortion, compressor, EQ, chorus, flanger, phaser, bit crusher, and more
16-track mixer with volume, pan, mute, solo, aux send, and insert effects
Advanced sound engine with analog modeling and physical modeling
Easy-to-use interface with drag-and-drop functionality
Powerful step sequencer with up to 64 steps per pattern
Real-time performance mode with pads, knobs, sliders, and XY pad
MIDI learn and automation support
VST/AU/RTAS/AAX plugin compatibility
Standalone mode with ASIO/Core Audio support
Why should you download Arturia Spark VDM?
If you are still not convinced that Arturia Spark VDM is worth downloading, here are some reasons why you should:
You can create authentic and realistic drum sounds from various genres and eras
You can explore and experiment with different combinations of drum machines and effects
You can save time and money by not having to buy expensive hardware or plugins
You can have fun and express your creativity with an easy-to-use and flexible software
You can get it for free from the link below
How to download and install Arturia Spark VDM for free?
Now that you know what Arturia Spark VDM is and what it can do for you, let me show you how to download and install it for free on your computer. Just follow these simple steps:
Step 1: Download the setup file from the link below
The first thing you need to do is to download the setup file from the link below. This is a torrent file that contains all the necessary files for installing Arturia Spark VDM on your computer. You will need a torrent client such as uTorrent or BitTorrent to download this file.
Download Arturia Spark VDM Setup File Here
Step 2: Extract the file using WinRAR or 7-Zip
Once you have downloaded the setup file, you need to extract it using a software such as WinRAR or 7-Zip. You will get a folder named "Arturia.Spark.VDM.v1.7.2-R2R" that contains several files inside.
Step 3: Run the setup.exe file as administrator
The next step is to run the setup.exe file as administrator by right-clicking on it and choosing "Run as administrator". This will start the installation process of Arturia Spark VDM on your computer.
Step 4: Follow the instructions on the screen
The installation process is very simple and straightforward. Just follow the instructions on the screen and choose your preferred options. You will need to accept the license agreement, choose your installation folder, select your plugin formats (VST/AU/RTAS/AAX), and wait for the installation to finish.
Step 5: Enjoy your free Arturia Spark VDM software
Congratulations! You have successfully installed Arturia Spark VDM on your computer for free. Now you can launch it either as a standalone application or as a plugin in your DAW (Digital Audio Workstation) of choice.
How to use Arturia Spark VDM to create amazing music?
Now that you have installed Arturia Spark VDM on your computer for free, let me show you how to use it to create amazing music. Here are some tips and tricks:
Overview of the user interface
The user interface of Arturia Spark VDM is divided into four main sections: Library Browser (top left), Main Panel (top right), Sequencer Panel (bottom left), and Mixer Panel (bottom right).
The Library Browser allows you to browse through all the available presets (drum kits) in Arturia Spark VDM. You can filter them by genre (such as Hip Hop, Electro House), by machine (such as TR-808), or by bank (such as Factory). You can also search for presets by name or keyword using the search bar at the top.
BPF/BRF), and their filter cutoff knobs (+/-100%). You can also see the master volume knob (from -inf dB to +6 dB), the master pan knob (from L100% to R100%), the master aux send knob (from 0% to 100%), the master output knob (from 1 to 16), and the master effect knob (from 0% to 100%). You can also see the XY pad that allows you to control two parameters at once by moving your mouse or finger on it. You can choose which parameters to control by clicking on the XY button and selecting them from the drop-down menu.
The Sequencer Panel shows you all the details of the selected pattern (sequence) in Arturia Spark VDM. You can see all the steps (from 1 to 64) in each track (from A1 to D8), their velocities (from 0% to 100%), their lengths (from 1/16 to 4/4), their shifts (from -50% to +50%), and their rolls (from x1 to x8). You can also see the pattern length knob (from 1 to 64 steps), the pattern resolution knob (from 1/96 to 1/4), the pattern swing knob (from -75% to +75%), and the pattern mode button (Song or Pattern). You can also see the transport buttons (Play, Stop, Record, Loop), the tempo knob (from 30 BPM to 240 BPM), and the metronome button.
The Mixer Panel shows you all the details of the mixer in Arturia Spark VDM. You can see all the channels (from A1 to D8 and Master) in each strip, their volumes (from -inf dB to +6 dB), their pans (from L100% to R100%), their mutes (M), their solos (S), their aux sends (AUX), their insert effects (FX), and their outputs (OUT). You can also see the master volume meter, the master peak meter, and the master clip indicator. You can also see the effect rack that allows you to add up to 14 effects on each channel or on the master channel. You can choose from a variety of effects such as reverb, delay, distortion, compressor, EQ, chorus, flanger, phaser, bit crusher, and more. You can adjust the parameters of each effect by clicking on its name and using the knobs below.
How to load and edit presets
One of the easiest ways to start using Arturia Spark VDM is to load and edit presets. Presets are pre-made drum kits that contain a set of instruments, patterns, and effects that are ready to use. You can load presets by using the Library Browser or by clicking on the Load button at the top of the Main Panel. You can browse through different categories of presets by using the filters or by using the arrows at the bottom of the Library Browser. You can also search for presets by name or keyword using the search bar at the top of the Library Browser.
Once you have found a preset that you like, you can load it by double-clicking on it or by dragging and dropping it onto the Main Panel. You will see that all the instruments, patterns, and effects will change according to the preset. You can then play back the preset by clicking on the Play button at the bottom of the Sequencer Panel or by pressing spacebar on your keyboard. You can also record your own performance by clicking on the Record button at the bottom of the Sequencer Panel or by pressing R on your keyboard.
If you want to edit a preset, you can do so by using any of the controls on the Main Panel, Sequencer Panel, or Mixer Panel. You can change the volume, pan, mute, solo, aux send, insert effect, output, tuning, decay, filter type, filter cutoff, velocity, length, shift, roll, pattern length, pattern resolution, pattern swing, pattern mode, tempo, metronome, transport buttons, effect rack knobs, XY pad parameters, and more. You can also drag and drop instruments from one pad to another or from one track to another. You can also drag and drop patterns from one slot to another or from one bank to another.
If you want to save your edited preset, you can do so by clicking on the Save button at the top of the Main Panel or by pressing Ctrl+S on your keyboard. You will be asked to enter a name for your preset and choose a location for it. You can then access your saved preset from the Library Browser under the User category.
How to create your own patterns and sequences
If you want to create your own patterns and sequences in Arturia Spark VDM, you can do so by using the Sequencer Panel. A pattern is a sequence of steps that contains information about the instruments, their velocities, their lengths, their shifts, and their rolls. A sequence is a collection of patterns that are arranged in a certain order.
To create a new pattern, you can click on the New button at the top of the Sequencer Panel or press Ctrl+N on your keyboard. You will be asked to enter a name for your pattern and choose a slot for it. You will then see an empty pattern with 64 steps in each track.
To add notes to your pattern, you can use any of these methods:
Click on a step with your mouse
Press a pad on your MIDI controller
Press a key on your computer keyboard
Drag and drop an instrument from the Main Panel onto a step
To delete notes from your pattern, you can use any of these methods:
Right-click on a step with your mouse
Press Delete on your computer keyboard
Drag and drop an instrument from a step onto the trash icon at the bottom right corner of the Sequencer Panel
To edit notes in your pattern, you can use any of these methods:
Drag a step up or down with your mouse to change its velocity
Drag a step left or right with your mouse to change its length
Hold Shift and drag a step left or right with your mouse to change its shift
Hold Ctrl and drag a step up or down with your mouse to change its roll
Double-click on a step with your mouse to open a pop-up window where you can adjust all its parameters
To create a new sequence, you can click on the New button at the top right corner of the Sequencer Panel or press Ctrl+Shift+N on your keyboard. You will be asked to enter a name for your sequence and choose a bank for it. You will then see an empty sequence with 16 slots in each bank.
To add patterns to your sequence, you can use any of these methods:
Drag and drop a pattern from one slot onto another slot
Drag and drop a pattern from one bank onto another bank
Drag and drop a pattern from the Library Browser onto a slot
Copy and paste a pattern from one slot onto another slot using Ctrl+C and Ctrl+V on your keyboard
To delete patterns from your sequence, you can use any of these methods:
Right-click on a slot with your mouse
Press Delete on your computer keyboard
Drag and drop a pattern from a slot onto the trash icon at the bottom right corner of the Sequencer Panel
To edit patterns in your sequence, you can use any of these methods:
Click on a slot with your mouse to select it
Press Tab on your computer keyboard to switch between slots
Use the arrows at the bottom left corner of the Sequencer Panel to move between banks
Double-click on a slot with your mouse to open a pop-up window where you can rename or duplicate it
How to mix and master your tracks
If you want to mix and master your tracks in Arturia Spark VDM, you can do so by using the Mixer Panel. The Mixer Panel allows you to adjust the volume, pan, mute, solo, aux send, insert effect, and output of each channel or of the master channel. It also allows you to add up to 14 effects on each channel or on the master channel.
To adjust the volume of a channel, you can use any of these methods:
Drag the volume fader up or down with your mouse
Click on the volume meter and type in Use the volume knob on your MIDI controller
To adjust the pan of a channel, you can use any of these methods:
Drag the pan knob left or right with your mouse
Click on the pan meter and type in a value with your keyboard
Use the pan knob on your MIDI controller
To mute or solo a channel, you can use any of these methods:
Click on the mute (M) or solo (S) button with your mouse
Press M or S on your computer keyboard
Use the mute or solo button on your MIDI controller
To adjust the aux send of a channel, you can use any of these methods:
Drag the aux send knob up or down with your mouse
Click on the aux send meter and type in a value with your keyboard
Use the aux send knob on your MIDI controller
To add or remove an insert effect on a channel, you can use any of these methods:
Drag and drop an effect from the effect rack onto the insert effect slot
Right-click on the insert effect slot and choose an effect from the drop-down menu
Click on the insert effect slot and use the arrows to scroll through different effects
Drag and drop an effect from the insert effect slot onto the trash icon at the bottom right corner of the Mixer Panel to remove it
To adjust the parameters of an insert effect on a channel, you can use any of these methods:
Click on the name of the effect and use the knobs below to change its settings
Double-click on the name of the effect and use a pop-up window to change its settings
Use the knobs on your MIDI controller to change its settings
To change the output of a channel, you can use any of these methods:
Drag the output knob left or right with your mouse
Click on the output meter and type in a value with your keyboard
Use the output knob on your MIDI controller
To adjust the master volume, pan, aux send, or effect of the master channel, you can use any of these methods:
Drag the master volume, pan, aux send, or effect knob up or down with your mouse
Click on the master volume, pan, aux send, or effect meter and type in a value with your keyboard
Use the master volume, pan, aux send, or effect knob on your MIDI controller
Conclusion
In this article, I have shown you what Arturia Spark VDM is, what are its features, why you should download it, how to download and install it for free, and how to use it to create amazing music. I hope you have found this article helpful and informative. Arturia Spark VDM is a great drum machine software that can help you create authentic and realistic drum sounds, rhythms, and grooves for your music projects. It is easy to use and flexible enough to suit any genre and style. And best of all, you can get it for free from the link below.
If you have any questions or comments about Arturia Spark VDM or this article, feel free to leave them below. I would love to hear from you. And if you liked this article, please share it with your friends and fellow music producers. Thank you for reading.
Frequently Asked Questions (FAQs)
Q: What are the system requirements for Arturia Spark VDM?
A: Arturia Spark VDM works on both Windows and Mac operating systems. Here are the minimum system requirements for each platform:
Windows: Windows 7 or higher (32-bit or 64-bit), 2 GHz CPU (Intel Core 2 Duo or higher recommended), 2 GB RAM (4 GB recommended), 2 GB free hard disk space, OpenGL 2.0 compatible GPU.
Mac: Mac OS X 10.7 or higher (32-bit or 64-bit), 2 GHz CPU (Intel Core 2 Duo or higher recommended), 2 GB RAM (4 GB recommended), 2 GB free hard disk space, OpenGL 2.0 compatible GPU.
Q: How do I activate Arturia Spark VDM?
A: You don't need to activate Arturia Spark VDM because it is already cracked by R2R. Just download and install it from the link below and enjoy.
Q: How do I update Arturia Spark VDM?
A: You don't need to update Arturia Spark VDM because it is already the latest version (v1.7.2). If a new version comes out in the future, you will need to download and install it from a new link.
Q: How do I uninstall Arturia Spark VDM?
A: To uninstall Arturia Spark VDM from your computer, you can use any of these methods:
Windows: Go to Control Panel > Programs > Uninstall a program > Find Arturia Spark VDM and click Uninstall.
Mac: Go to Applications > Find Arturia Spark VDM and drag it to the Trash.
Q: Where can I find more information about Arturia Spark VDM?
A: You can find more information about Arturia Spark VDM by visiting the official website of Arturia at https://www.arturia.com/products/drums/spark-vdm. There you can find more details about the software features, specifications, tutorials, videos, reviews, testimonials, and more.